I just got a FORM 1. How long should I charge it before I use it?
While we're sure you're eager to get started, we recommend charging it for eight hours prior to first use. Letting your vibrator fully charge protects the battery and ensures a longer lifespan.
What's the best way to use FORM 1?
Alone: FORM 1 can be cupped in your hand and held against the body for vulva or clitoral stimulation. The finger groove and Pleasure Dome can help you target direct clitoral contact.
With a partner: FORM 1 is slim enough to fit between two bodies during sex. Hold it yourself or give it to your partner for extra stimulation.
On the go: Insert FORM 1 into the included Stay-in-Place Panty Sleeve and stick it inside your favorite pair of undies or lacey lingerie. Perfect for long car rides, date nights, or for the especially courageous, work meetings. Use the FLIRTTM Remote Control to turn FORM 1 on, off, and change settings discreetly.
Remotely: Hand the FLIRTTM Remote Control to a partner to put your pleasure in someone else’s hands.
How do I use the FLIRT TM Remote Control?
FLIRT can be used up to 32 feet away without abstractions from FORM 1. FORM 1 and FLIRT remote are auto-paired at the factory. If they become disconnected, press the ~ button on both FORM 1 and FLIRT for 3 seconds. The light will flash to indicate the items are paired.
Control vibration levels and mode with the same buttons as on FORM 1. LED power indicator lights let the user know the current mode and level. See FORM 1 Manual for more details.
Does my product sleep to save batteries?
Yes, good question. In order to preserve battery life for both the FLIRT Remote and FORM 1, the products are programed to sleep after 8 hours of no use. In order to wake your products, press ~ button on the FORM 1 and any button on the Flirt. The FORM 1 will blink TWICE and the remote will go from alternating RED and BLUE buttons to THREE simultaneous blinks.
What are the Tease modes?
FORM 1 comes with five preprogrammed delay modes. These “Set is it and forget it” modes can bring unexpected jolts of excitement for up to 30 minutes as you go about your day.
How do I use the Tease modes?
While in mode 5, simultaneously press and hold the + button and the – button on FLIRT for 1.5 seconds to enter Tease Mode. Press the + button to cycle through the 5 delay settings. The LED power indicator lights will let you know the delay setting. See FORM 1 Manual for more details.
How do I change the batteries on FLIRT TM Remote Control?
FORM 1 comes with a plastic Battery Tool. Use this to pop open the tab on the back of the remote (the piece with the Jimmyjane logo). Remove the battery and replace with a 3V Lithium Battery.
Can I use FORM 1 anally?
No. Do not insert FORM 1 into the rectum. It’s too small and could get lost.
Should I use lubricant?
Yes. Lubricant can create a more pleasurable experience, whether you're going solo or playing with a partner, as your FORM 1 will be able to move more smoothly and comfortably over the body. Be sure to use a water-based lubricant. Silicone-based lubricants are known to degrade silicone vibrators.
Help! My FORM 1 won't charge.
Check your charging cord, is the USB end fully plugged into a computer or outlet? Next, check the magnetic contacts to make sure they’re lined up correctly.
The charging light will illuminate when FORM 1 is charging. If no lights remain illuminated, FORM 1 is not making proper contact with the charging cable. Reposition it until the light remains lit. Still having issues? Don't worry – contact our customer service team, and they'll take good care of you. NOTE: The Jimmyjane Logo will be facing the side of the buttons when connected correctly.
Help, my FORM 1 won't turn on.
Though it sounds obvious, the first thing you should check is whether it's out of battery power. Press any button on FORM 1 – a blinking light let’s you know if it needs to be charged.
3 blinks – high charge
2 blinks – medium charge
1 blink – low charge
If that doesn't do the trick, check to see whether it has accidentally been locked. If you press the mode button and you get ONE blink you are in travel mode. Press the + and ~ button at the same time to exit Travel.
How do I use the Digital Travel Lock?
To engages the travel lock, press (+) and (~) button at the same time for 1.5 seconds. This makes it impossible for the vibrator to turn on when buttons are pressed. To disengage it, charge it momentarily, or press (+) and (~) at the same time for 1.5 seconds.
Jimmyjane believes that if anything should be beautifully designed, it’s the products that engage our sexuality... read more »
M-F 7:00am-3:30pm PST
9145 Owensmouth Avenue
Chatsworth, CA 91311